How to Flush Your Water Heater
in 8 Simple Steps

By Kealia Reynolds

You use your water heater more frequently than any other appliance in your house. By learning how to flush your water heater, you’ll prolong its lifespan and save money.

The US Department of Energy recommends flushing one quart of water from tank-based heaters every three months. Here’s your step-by-step guide to test—and drain—your water heater to keep it in best working order. Plan 25–75 minutes for this project.


  • Garden hose
  • Large pan or bucket
  • Towel
  • Flat head screwdriver
  • Protective gloves

Safety considerations and lifetime of water heaters

You’ll be dealing with extremely hot water throughout this process. Make sure you wear heavy-duty gloves and long-sleeved clothing to prevent scalding water burns. Read the manufacturer’s manual before beginning maintenance or repairs. This could help prevent a possible fire, explosion, or personal injury.

If you feel uncomfortable flushing your water heater on your own, call in a pro. Professionals tend to charge $170–$230 to flush a water heater.

Water heaters last an average of 8–15 years, so if you’re experiencing issues with the process, it may be time for a replacement. Constant water temperature issues, unusual pressure, a milky texture in the tank, or brown sediment emerging from the faucet when the hot water is turned on, are all signs that it’s time for a replacement.

How to flush a water heater

1. Turn off your system

  • For gas water heaters, find the gas pipe leading to your thermostat and pilot light and turn the valve to the off position—on older models, at the end of this project, you’ll need to manually relight your pilot.
  • For electric water heaters, turn off the switch that gives power to your water heater in your home’s circuit breaker box.

2. Close the cold water supply valve

This valve is located at the top of your water heater and is often marked with blue tape. Turning off this valve will prevent any additional water from entering your tank while it’s draining.

3. Relieve the system pressure

Open a hot water faucet elsewhere in your home. This relieves system pressure inside the tank and prevents a vacuum from forming in the water lines. Leave the faucet on for the duration of  the flushing process.

4. Open the pressure relief valve

Though this step isn’t necessary, we do recommend it. Opening the pressure relief valve can help water in the tank drain more quickly. If you choose to complete this step, place the bucket underneath the valve to catch any water that comes out. When this water comes out from the storage tank, it will be extremely hot. Exercise caution when opening the valve. Use the towel to wipe up any excess water spilled from opening the valve immediately.

5. Connect a garden hose to the drain valve

Screw in the garden house to the drain valve and run the end of the hose outside or into a drainage bucket. Make sure the receptacle can accommodate the full capacity of your storage tank—when possible, drain directly into a sewer system.

6. Open the drain valve

Most water heaters will come with a knob to open the drain valve—if yours doesn’t have this knob, you’ll need to grab the flat head screwdriver to open the valve. Once open, drain 2–3 gallons of water. If the water is milky, drain the entire storage tank. Flush the full storage tank every 1–3 years.

7. Flush the water heater

Keep the garden hose attached to the drain valve. Open the cold water supply valve. Let the water supply run for 3–5 minutes, checking the water draining from your system. Once clear, close the drain valve and disconnect the garden hose. Close the pressure relief valve if you opened it in step four.

8. Finish

Wait for the storage tank to fill completely. Open the pressure relief valve again to release air that accumulated in your system, then close it. Check the faucet that was turned on during step three—cold water should be running—and turn it off. If you shut off the gas to your gas water heater, turn it back on. Relight the pilot light if needed on older model heaters. If you shut off electric, turn the corresponding breaker back on to restart your water heater. Wait for 20–30 minutes. Turn on a hot water faucet to ensure the water is hot.

More in Maintenance

Maintenance & Renovation

Why Your Tap Water Smells Bad

Tap water can take on various foul odors for a number of reasons. Read on to learn some possible reasons why your tap water smells bad.


Smart Water Monitoring for the 21st Century Home

Meet the new smart home device that catches water leaks early, automatically shuts off your water in the event of an emergency, and monitors water use and pressure with impeccable detail.

Maintenance & Renovation

Guide to Winterizing Your Home

Keep your home warm and safe as the temperatures drop. Here are nine steps you can take to winterize your home.

Maintenance & Renovation

How to Prevent Frozen Pipes

A burst pipe can cause thousands of dollars in water damage to your home. Here’s how to prevent your pipes from freezing, what to do if you suspect a frozen pipe, and what to do if a pipe bursts.

Maintenance & Renovation

How to Set Your Water Heater Temperature

Prevent the dangerous risk of scalding, stop bacteria breeding, and keep you water temperature at a comfortable level. Here’s how to set your water heater temperature in four steps.

Maintenance & Renovation

Furnace & Heater Troubleshooting Guide

Your comprehensive furnace and heater troubleshooting guide—identify the source of the problem and determine whether to call in the the professionals.

Home Warranty

Seasonal Home Maintenance Checklist

Prevent costly repairs and keep your home in good working order with our comprehensive checklist. Here’s what you need to do each spring, summer, winter, and fall.

Maintenance & Renovation

Types of Energy-Efficient
Home Heating

We explore four types of energy-efficient home heating systems, how they work, overall cost, and how to choose the best one for your home.

By continuing to browse or by clicking “OK” you agree to the storing of first- and third-party cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. Privacy Policy.