Home > Gutters > How Much Does Gutter Installation Cost? | 2023 Pricing Guide

How Much Does Gutter Installation Cost? | 2023 Pricing Guide

Updated Jan 10, 2023

Roofer welding the gutter to a new roof

Updated Jan 10, 2023

Home > Gutters > How Much Does Gutter Installation Cost? | 2023 Pricing Guide

We recommend the best products through an independent review process, and advertisers do not influence our picks. We may receive compensation if you visit partners we recommend. Read our advertiser disclosure for more info.

Your home’s rain gutters are important; they direct rain and melted snow away from your home’s foundation, helping to prevent mold, mildew, and other water damage. Replacing a home’s gutter system is costly, but delaying necessary repairs and improvements can make it even more so.

To help you prepare your budget for this significant home renovation, we’ve outlined the costs of installing new gutters or replacing an existing system. Whether you plan to go the do-it-yourself (DIY) route or hire a qualified contractor, our cost guide should help you set aside the necessary funds to get the job done correctly. We’ll also offer guidance on how to get the best gutter guards to make cleaning and maintenance easy.

Gutter Installation Cost

It will cost anywhere from $1,000 to $7,000 to get a full set of gutters installed on your home. The most common type of gutter, aluminum, costs $5 to $15 per linear foot. An entire aluminum gutter installation project may cost from $1,400 to $7,000, including hangers, downspouts, flashing, and other components.

The cheapest gutters on the market are made of vinyl and cost $3 per linear foot or $900 for the project total. On the high end, copper gutters can cost up to $40 per linear foot or $11,500 for the entire project.

Below are the average prices per linear foot and the total costs for gutter installation based on a 200 linear-foot project.

MaterialMaterial Cost per Linear FootLabor Cost per Linear FootCost per Project (150 to 200 linear feet of gutters)
Aluminum$5–$15$5–$7$1,800–$7,000
Copper$25–$40$8–$10$8,000–$11,500
Galvanized Steel$4–$12$6–$7$2,100–$4,600
Steel$8–$15$6–$7$2,600–$5,000
Vinyl$3–$6$4–$5$900–$2,000
Wood$21–$32$7–$12$4,000–$8,000
Zinc$20–$40$6–$7$7,000–$10,000

Gutter and gutter component pricing are aggregate figures taken from current market rates for raw materials. Labor costs typically take up between 40% and 60% of total gutter installation costs unless higher-priced materials are used.

You can get an accurate cost assessment of your exact gutter installation costs from the providers here:

Factors That Influence Gutter Installation Cost

One of the many reasons we recommend professional gutter installation is the accuracy with which a company representative can assess your full costs. These assessments will include a range of cost factors, including material, home size and surroundings, and more. We’ve outlined these for your benefit.

Gutter Materials

The most impactful part of a gutter installation cost is the materials. Some materials are more durable than others, translating to higher gutter prices per foot.

Aluminum Gutters

Aluminum gutters cost between $5 and $15 per linear foot, with downspouts coming in at $5 to $9 per linear foot. A downfall of aluminum gutters is that they are prone to bending and corrosion. However, their availability and workability lead many homeowners to choose them anyway.

Copper Gutters

Copper gutters are a decidedly premium option, with costs ranging between $25 and $40 per linear foot. The downspouts are more affordable, costing less than $20 per linear foot. Cost aside, these are some of the best gutters you can buy and can last up to 50 years. Copper gutters also have a modern look and can enhance your home’s curb appeal and resale value.

Galvanized Steel Gutters

Galvanized steel gutters are typically priced between $4 and $12 per linear foot. They are available in both seamless and sectional options. In addition, it’s relatively easy to color-match galvanized steel gutters to your home and existing fixtures. However, these are not good options if you live in the South or West, where high heat can cause your gutters to expand and crack.

Steel Gutters

Steel gutters are a solid intermediate or middle-of-the-road option priced to match at $8–$15 per linear foot. If properly installed, they will last more than 20 years. As a heavier-duty alternative to aluminum, they will also stand up to extreme weather and heavy rainfall. Steel gutters are heavier than aluminum, so professional installation and the proper hangers are essential.

Vinyl Gutters

Vinyl is the most affordable of any gutter type. With associated costs of $3–$6 per linear foot, its workability and cost make it popular among DIYers and those on a tight budget. However, vinyl is much less durable than other materials. Vinyl downspouts cost around $4 to $8 per linear foot. If you know your house is not subject to much water damage and want to keep total costs down, vinyl gutters can be a solution. However, many contractors will not offer vinyl gutters if steady rain is the standard for your area.

Wood Gutters

Wooden gutters are a more common addition to older homes, but can add to the curb appeal of any residence. Your gutter quality and cost will depend on the type of wood used, finishing paint applied, and added woodworking done for aesthetic purposes. The cheapest woods for this purpose are pine and cypress. Cedar and redwood are preferred, for their overall hardness and water resistance. Typical costs for wood gutters are $17 to $25 per linear foot, with installation costing an additional $7 to $12 per linear foot.

Zinc Gutters

Zinc gutters are a high-end, long-lasting option at $20 to $40 per linear foot. These will typically be used in home improvement projects focusing on curb appeal. Over time, your zinc gutters will develop a patina, which is attractive even on a newer home.

Infographic showing the costs of different gutter materials
Image Source: House Method

Gutter Styles and Sizes

The gutter size and style also significantly impact the total cost of this project. Gutters typically come in 5, 6, or 7 inches, but commercial gutters can be larger.

Here is a breakdown of gutter installation costs by style:

StyleHighlightCost per Linear FootProject Cost
FasciaBlend in with roof for aesthetic appeal$6–$20$1,500–$3,000
K-style GuttersHold more water than other styles$8–$15$2,800–$4,000
SeamlessCome in several styles and have better longevity$9–$25$3,000–$7,500
U-style/Half-Round GuttersBest for metal roofs$4–$25$3,200–$5,000
V-styleMainly made of wood; Clogging-resistant$19–$21$3,600–$6,000

Pricing for the above components reflects current average retail costs, which vary from seller to seller and by location.

Downspout Extension, Flashing, and Other Accessories

Flat material and labor fees per linear foot are not the only costs you’ll incur when installing gutters. You’ll also need splash blocks. These concrete blocks that attach to the lower end of your downspouts to direct water cost $8–$12 each.

Another component, flashing, is usually sold in 10-foot lengths. Depending on the material and retailer, it will cost between $0.50 and $2.50 per linear foot. However, your gutter installation may not require the addition of new flashing between your gutter and fascia, so you may not have to pay for this.

Here are more necessary components you’ll need for a full gutter installation:

Material  DownspoutsElbowsEnd CapsHangers
Aluminum  $5–$9 per foot$4–$13 each$8–$15 each$2–$4 each
Copper  $15–$25 per foot$15–$20 each$8–$20 each$18–$22 each
Galvanized Steel$4–$6 per foot$4–$7 each$4–$7 each$7–$9 each
Steel$8–$12 per foot$12–$15 each$9–$14 each$3–$5 each
Vinyl$4–$8 per foot$3–$5 each$5–$12 each$1.50–$3 each
Wood$14–$20 per footN/AN/AN/A
Zinc$12–$15 per foot$10–$13 each$3–$5 each$5–$7 each

Pricing for the above components reflects current average retail costs, which vary from seller to seller and by location.

Climate and Location

Vinyl or aluminum gutters may be the most cost-effective solution if your home is in a temperate climate zone. However, galvanized steel and copper are more resistant to the elements; if you live in a more extreme climate, these will serve you better. Your choice of gutter guard will also affect your gutter system’s efficacy over time.

Gutter Removal and Disposal Costs

Gutter removal is offered with most full-service gutter installation packages. Starting prices for this service will range from $100 to $150. Since this includes dump fees and associated labor, it’s a popular add-on for homeowners.

Gutter Painting and Cleaning Costs

Gutters can be painted to match the outside of your home. If gutters are ordered from the manufacturer in the color you need, the cost can be cheaper than having them painted after the fact. Expect to pay around $2 per linear foot for gutter painting services.

Gutter cleaning typically costs around $150. Expect to pay anywhere from $0.50 to $1.50 per foot. Depending on the condition of your gutters, you could pay more. You’ll need to contract this service every four to six months. However, a solid gutter guard setup should mitigate the need for this and prevent most clogs.

Home Size and Roof Height

The size of your home and roof height will impact the total cost of gutter replacement. Sometimes it can be hard to properly direct water off a roof, and additional accessories and pieces are needed to move the water. In these situations, pricing can be increased, but this should be determined at the time of the quote. Sometimes roof height makes a gutter installation project more dangerous, which could increase total costs.

Labor Costs

Labor costs for gutter installation vary from company to company. Generally, gutter installation labor costs will make up about 40% to 60% of your final total when you hire a full-service gutter company. National averages are between $7 and $9 per linear foot and raw material costs. 

Other factors that can increase labor costs are the following:

  • Areas with a higher cost of living
  • Homes with two to three stories
  • Inaccessible or steep roofs
  • More than six corners on the roof
  • Unconventional gutter styles

Seamless vs. Sectional Gutters

Seamless gutters are highly sought-after for several reasons, including the following:

  • Added stability
  • Enhanced curb appeal
  • Superior leak protection
  • Superior workmanship

These gutter types require on-site professional installation due to their manufacturing method. Typically, your gutter professionals will bring rolls of sheet metal of a specific type to your home, which will be run through a gutter-shaping machine and custom formed to the footprint of your roof. Seamless gutter costs vary widely and range between $8 and $30 per linear foot, depending on the metal used.

Sectional gutters are far more affordable in most cases. Like seamless gutters, exact costs depend on the material used, home size, and much more. However, basic material costs typically amount to the figures outlined in the two tables above.

How Does Gutter Installation Work?

Like many home services, gutter installation begins with an in-home consultation from a gutter specialist or a local gutter contracting company representative. During this, your home will be assessed for linear footage, surrounding foliage, gutter height, and material needs.

Gutter Installation vs. Replacement Costs

Many homeowners think that replacing gutters is more affordable than new gutters. However, this is not the case. Homeowners should add $2 per linear foot since the old gutters must be removed and disposed of. Removal and disposal fees could be avoided if you’re an avid DIYer and can do this yourself.

In most cases, your gutter professional will give an all-inclusive cost estimate that will include removing your existing gutter system. The table below outlines the average cost for gutter replacement, including the cost of removal and disposal, based on a 200 linear foot project need.

MaterialVinylAluminumSteelCopper
Gutters$5–$8/ foot$7–$17/ foot$10–$17/ foot$27–$42/ foot
Total Installation Cost$1,000–$2,400$1,800–$7,400$3,400–$7,900$8,400–$11,900

Some local governments offer programs that make gutter replacements cheaper to increase the curb appeal of neighborhoods. Some public works programs, like the 50/50 Program, cover 50% of the cost of gutter replacements in order to assuage the financial burden of home repairs.

DIY vs. Professional Gutter Installation Cost

Installing gutters yourself will allow you to avoid paying labor costs but will leave you without the guaranteed maintenance and warranties many gutter professionals offer. Additionally, working at heights on ladders can be incredibly dangerous for the untrained. Any owner of a multi-story home would do well to hire a gutter contractor to handle this.

However, if you opt for DIY installation, you could stand to save these amounts for a 200-linear-foot installation:

  • Aluminum: $1,000–$1,400
  • Copper: $1,600–$2,000
  • Steel: $1,200–$1,400
  • Vinyl: $800–$1,000
  • Zinc: $1,200–$1,400

How To Calculate How Many Linear Feet of Gutters Your Home Needs

Calculating how many linear feet of gutters your home needs is a fairly simple process:

  1. Measure the outer footprint of your home by walking around it.
  2. Add up the measurements of all outer walls that are lined with gutters.
  3. Add 10%. Especially if you’re budgeting for a DIY gutter replacement or installation, this excess will give you enough cushion if you make mistakes or have to make odd cuts in your gutters for corners or other odd sections.

How Much Do Gutter Guards Cost?

Gutter guards are a must for most gutter systems. Installing a quality gutter guard can extend the lifespan of your gutters and decrease cleaning costs and frequency. Your gutter guard material and whether or not you opt for professional installation will greatly affect costs.

Materials for gutter guards range from $0.35 to just under $7.00 per linear foot, equating to $70 to $1,400 for a 200-linear-foot gutter system. For a full breakdown of costs, please see our gutter guard cost breakdown here.

Our Top Choice for Gutter Installation

LeafFilter is the top recommended company for gutter installation, custom gutter solutions, and guards. LeafFilter has an extensive history in the industry, great customer reviews, and a proven system that can be installed in 48 states. Leaf Filter not only installs gutters but offers its patented, three-piece gutter guard system that will protect your gutters from getting clogged with debris.

Best Overall
LeafFilter
  • Full installation of patented 3-piece LeafFilter system
  • Stainless steel 275-micron micromesh screen
  • Lifetime transferable warranty
  • Free estimate with in-person inspection

LeafFilter costs between $17 and $45 per linear foot for gutter guards, but total costs will ultimately depend on your location and the size of your home. LeafFilter’s system also comes with a lifetime transferable warranty.

When put to the test, LeafFilter’s gutters and gutter guards had high marks in durability, debris resistance, and material used. LeafFilter’s gutter and gutter guard system will greatly reduce maintenance and repairs needed in the future.

For more information, read our in-depth LeafFilter Review.

Final Thoughts: Is Gutter Installation Worth the Cost?

In short, yes. Professional gutter installation is the way to go for most full-scale gutter overhauls, repairs, or replacements. Gutter installations are challenging and sometimes dangerous as a DIY home improvement task. If yours is a one-story home, you may be less anxious about safety. However, for two-story jobs, you should look into getting estimates from gutter companies in your area.

In addition, gutter installation packages from licensed contractors come with removing your existing gutters, full installation of new gutters and associated components, and labor and material warranties.

Gutter Installation FAQs

What does Home Depot charge to install gutters?

Home Depot will adjust its pricing for your gutters depending on the type and size of the home. Homeowners should anticipate anywhere from $5 to $12 per linear foot for standard vinyl, aluminum, or steel gutter materials.

How often should gutters be replaced?

The longevity of your gutters is based largely on the type of material. Most aluminum and steel gutters will last between 20 and 40 years. Vinyl gutters may not make it this long and could need replacement sooner.

Are new gutters worth it?

New gutters are worth the price if you have issues with your current system or water damage around your home’s foundation. New, modern gutter materials are high-quality and can help improve water flow and decrease long-term maintenance.

How can I prevent ice buildup and damage to my gutters?

Heat tape is a great way to prevent ice buildup and damage to your gutters. Also, heated gutter guard systems can help ensure ice dams do not form throughout the rough winter months.

Can I get away with having a single downspout on my gutter system?

A single downspout works well for many homes. However, a gutter installation professional needs to be consulted to be sure that this is enough of a flow of water and does not cause additional damage to the home.

More Gutter Resources